Beautiful and stylish jewelry can be purchased not only in the store. It is enough just to show a little imagination, and the handmade jewelry is ready! I present to your attention string beads.
It is necessary
- - sewing thread - 5 spools;
- - PVA glue;
- - cotton pads;
- - beads of different colors, shapes and sizes;
- - nippers;
- - round-nose pliers;
- - the needle is thick;
- - the needle is thin;
- - pins for jewelry with an eyelet (pins).
Instructions
Step 1
First you need to make blanks for future string beads. To do this, divide the cotton pad lengthwise into two parts, drip PVA glue onto one of which, then roll a dense ball out of it. Apply a little more glue to the resulting part and wrap it in the second part of the cotton pad in exactly the same way, that is, forming a ball. The number of such blanks depends on the desired length of the decoration.
Step 2
Next, the blanks from cotton pads need to be wrapped with sewing threads. Do this until the surface of the balls ceases to see through them. As soon as this happens, the details of the decoration should be secured with the same thread. To do this, thread the thread into the needle, then sew the workpiece through the upper layers of the winding, and certainly in different directions.
Step 3
Now, in each of the thread beads, you need to make a through hole with a thick needle. Insert a pin with an eyelet into the hole. The excess edge of the pin, which comes out on the other side of the bead, must be cut off, and its tip must be bent so that a ring is formed. Do the same with all the other details of the beads.
Step 4
It remains only to collect the future decoration. From the rest of the pins, you need to create links from beads of different shapes and sizes 8 centimeters long, then connect everything into a single chain. The string beads are ready!
