Billiards is an exciting game that requires a good eye, precise coordination of movements, an analytical mind and, of course, long training. Buying equipment is quite expensive, training in some club is also expensive, so the best solution would be to make a billiard table yourself and play for your full pleasure.
It is necessary
Bars, strips, overhead staples, wire staples, strips, mesh baskets, wrapping material, legs, chipboard sheet for countertops, drill, screwdriver, nails, screws
Instructions
Step 1
Make a billiard base. To do this, you collect the details of the future base from the bars - you grease two bars with glue, skipping the places where the pockets will be located, and for strength you hammer together with several nails. Then drill holes in the upper bar and pull off the two bars with screws. In the same way, you make the opposite part, after which you connect two dried parts, placing inner bars between them. The length of the rib is 1005 cm, the length of the inner bar is 535 mm.
Step 2
Make 4 legs 5 to 10 mm thick. The legs will need pads that can be cut out of plywood and sanded.
Step 3
Make a tabletop out of a chipboard sheet, carefully leveling the surface.
Step 4
Make table bumpers and decorative trims. Decorative strips are made from carefully sawn and sanded bars. The sides are cut out of rubber and pasted over with a material similar in color to the material of the table.
Step 5
Make staples and staples from wire according to the instructions, cover the tabletop with fabric, and assemble the billiard table.
Step 6
Place the sides on the surface of the billiard table, and fit the pockets, carefully calibrating their size so that it fits the size of the billiard ball.
Step 7
Make a cue and a triangle. The cue can be made from any stick of a suitable diameter (25 mm), and the triangle can be assembled from the planks.
