A blouse is a must-have of a woman's wardrobe. Even beginner needlewomen will be able to sew it with their own hands, because to make simple-cut products, basic sewing skills and very little fabric are required.
It is necessary
- - 1-1.5 m of light, softly draped fabric;
- - sewing accessories.
Instructions
Step 1
Select material for sewing a blouse. Lightweight blouse fabrics such as cambric, chiffon, crepe de Chine, fine knitwear, viscose, silk, and so on will do.
Step 2
One of the simplest models is a summer blouse made of square pieces of fabric. It can be sewn from any cotton material, silk or from two shawls.
Step 3
Cut 2 squares with sides 60-70 cm (depending on your size). Fold the scarves in half and mark the middle. Set aside 15 cm on each side for the neckline and sew several stitches at a distance of 5 cm.
Step 4
Determine the armhole line. Slip the construction over yourself and mark the desired sleeve width. Fold right sides together and sew from bottom edge to mark. Seam the side cuts with an overstitch or zig-zag stitch.
Step 5
Sew the neckline and armholes with a bias tape. Fold the lower cut 2 times and delay at a distance of 1 mm from the fold. If you are sewing a blouse from scarves, then you do not need to process the cuts.
Step 6
A batwing sleeve blouse has been in fashion for decades. This cut is suitable for ladies with different builds, and it is quite simple to cut and sew it.
Step 7
Measure the circumference of your hips, wrists, desired length of the blouse, and the length of your arm from the base of your neck to the wrist. Fold the fabric in half along the cuts, right-side in, and then in half again along the edges of the fabric. Place the fabric so that the fold is on your right side.
Step 8
Build the pattern directly on the fabric. From the upper right corner, lay down 2 cm and to the left - 10 cm. Connect the points with a smooth line, forming a neck. To the left of it, set aside the measurement of the length of your outstretched arm. Place a mark, down from this point, draw a straight line equal to half the measurement of the girth of the wrist.
Step 9
Set the length of the blouse down along the fold from the neckline. To the left of this point, set aside ¼ hip measurements. Connect this mark to the point on the bottom of the sleeve with a smooth, slightly concave line. Cut out the part, leaving 1, 5 cm on all cuts for seam allowances and hem of the bottom of the sleeves and the bottom of the product.
Step 10
Unfold the blank for a batwing blouse. Stitch the sideline. Finish the neckline.
Step 11
Fold the lower part of the sleeves and the bottom of the product to the wrong side, first by 0.5 cm, and then another 1 cm and sew on a sewing machine or manually with a blind stitch.
