Balloons are an excellent decoration material. The designs of them look quite presentable and impressive. You can choose any colors for the decoration of the holiday and give the garlands a variety of shapes.
It is necessary
- - Balloons;
- - fishing line;
- - rope;
- - polyethylene film.
Instructions
Step 1
The balls, electrifying, attract various debris, which shortens their "life". Therefore, where you will be weaving the garland, blow the floor with a compressor and put plastic wrap. If the length of the garland is more than six meters, and it will be attached at two points, lay it with rope, attaching the balls to it. Without a rope, the line will stretch, the distance between the balls will increase, and the garland will become unusable.
Step 2
Cut the line three meters longer than the future garland. Tie one end to some firmly fixed object, leaving half a meter free. Pull the line down and tie the other end to another object, such as a doorknob. It turned out the axis of the garland.
Step 3
Inflate the balloon. Pinch the ponytail with two fingers. Do the same with the second ball. Attach the tails of the balls so that they intersect and wrap the end of one ball around the other. Tie them up. Make another two of these balls. Lay one ligament on top of the other in a crisscross pattern and twist.
Step 4
To put the resulting bunch of four balls on a string, separate two balls and bring them to the beginning of the axis. When the balls are in place, swap the balls the line went through twice to prevent the bundle from slipping.
Step 5
Now string the next four on the line and align tightly with the first. Note that the ligament must be firmly secured in place as moving it along the line will damage the ball material. When the balls are in the correct position, they can be rotated, creating a spiral effect. Try to keep the balls from touching the floor while weaving. Remember that the softer the balls are, the longer the garland will hang.
