The best option for a bottom tackle is when it consists of a large and small reel, mounted on a strong stand, and a sinker with a ring. It is not difficult to make and install such a tackle, but you need to stock up on the necessary materials and choose a place for fishing.
It is necessary
Two spools, fishing line, pegs, hooks, sinker, copper wire, cords, tools
Instructions
Step 1
To make the bottom tackle yourself, you need to wind 100 m of fishing line with a diameter of 0.5 mm on a large reel, and on a small reel - 50 m with a diameter of 0.2 mm.
Step 2
Then attach a fastener to the end of the fishing line, which serves to attach the insert with hooks.
Step 3
The coils are bolted to metal posts, which must be firmly in the ground.
Step 4
Since the sinker needs to be attached to a line with a thickness of at least 0.5 mm, and not to an elastic band, its weight can be made more. It is important that the lead cannot move as the line moves through the ring.
Step 5
In addition, the lead can be converted into a feeder. To do this, it must be made flat, and small holes must be drilled along the edges into which copper wire is passed by arcs.
Step 6
The ring must have a diameter of at least 15 mm and a thickness of 2-3 mm. It must be sanded well from the inside so that the line glides.
Step 7
Further, the ring is connected to the sinker using a strong cord 30 cm long, while the connection of the ring to the cord and the sinker to the cord should be free.
Step 8
If fishing will take place in a pond with an overgrown bottom, and it is necessary that the hooks are located above the plants, then you can use a float. It should be larger than usual and free to lift the line with hooks.
Step 9
To install the tackle, you must first drive a rack with a small coil on the shore and next to it, three to four meters away with a large one. Behind the small reel, you must place a peg with a nail, on which a loop from a fishing line with hooks will be put on during fishing.
Step 10
Then you need to release the line from the large reel to a length equal to two casting distances. The line on the right and left sides must be folded together and cast.
Step 11
The final step in attaching the bottom tackle is to install the reel brakes and signal bells.
