From a rubber heating pad, which has served its purpose, you can make a wonderful shape like silicone and pour an alabaster cutting board into it. Such a board can be a great gift for various holidays and, at the same time, a hot plate.
Instructions
Step 1
Remove the plug by prying it off with a nail file and tape the neck inside and out with 2-sided tape.
Step 2
Now cut a rubber top around the perimeter of the grape pattern, which can be used as a mat for rolling out the plasticine.
Step 3
After covering the box with a bag, fill the mold with alabaster in half with water and silicate glue in a ratio of 2: 1: 1. Leave to harden overnight in a warm place near the battery.
Step 4
Remove from the mold and leave to dry for another day in a warm place.
Step 5
Rub the surface of the board with a more bumpy surface with fine sandpaper. Mark the outline of the board on a napkin.
Step 6
On the smoother side, grease the surface with silicate glue and glue the background - a napkin, having previously separated the 2 lower layers. Using the brush, smooth the napkin from the center to the sides of the board.
Step 7
Now sketch on the border of the napkin the shape of the board on the sides and bottom. And glue on silicate glue, pre-evenly distributing it over the surface of the board. Alabaster absorbs glue well, and the napkin will lie perfectly flat.
Step 8
Glue Santa Claus and company. The photo shows that the contours of the picture go beyond the picture, so you need to first stick the images in the center, and then the frame itself around the edges.
Step 9
Decorate the neck of the cutting board.
Step 10
Cover with 3 layers of silicate glue on each side and make a hole for hanging the board with a gimbal.
