How To Sew A Women's Winter Coat

Table of contents:

How To Sew A Women's Winter Coat
How To Sew A Women's Winter Coat

Video: How To Sew A Women's Winter Coat

Video: How To Sew A Women's Winter Coat
Video: Making My First Winter Coat 🧵 Sew With Me 2024, April
Anonim

Self-confident women who value their own individuality and style prefer elegant coats for winter. This outerwear never goes out of fashion, only the length, finish, cut change. This type of clothing is suitable for ladies of any age.

How to sew a women's winter coat
How to sew a women's winter coat

It is necessary

  • - fabric made of wool or cashmere,
  • - lining fabric,
  • - buttons,
  • - sewing machine.

Instructions

Step 1

Choose fabric for the coat and fabric for the lining. Cut out two parts of the shelf, backrest, sidewalls and slats, one-piece with a hem, from them. Then make the elbow and top for each sleeve, collar and collar.

Step 2

Stitch darts on chest, press down. Sew the strips to the shelves, iron the seams. Fold the leaves with the right sides of the details and grind them along the outer cuts, slightly rounding the corners. Cut the seam allowances close to the stitching. Turning out the leaflet, stitch it to the shelf along the entrance to the pocket.

Step 3

Place a raised seam just above and below the pocket entrance. After ironing the allowances, iron the leaf to the side cut. Fold the burlap pockets with the entry allowances, sweep or pin and stitch the leaves at the stitching seam. Press the sacks forward and sew. Sew the edges of the leaves by hand with blind stitches.

Step 4

Sew embossed, middle and shoulder seams. Unscrew the one-piece hem to the right side, sew the piping at the neck of the back. Baste the hem to the neckline, then stitch.

Step 5

Stitch the collar details to the stand details. Cut and iron the allowances. Sew each detail close to the seam. Sew the outer cuts of the collar. Make sure that the lower collar is somewhat narrower than the upper one. This will prevent the corners from scuffing.

Step 6

Place the collar between the brisket and coat. Sew the top collar into the neckline of the brushes, the bottom collar into the neckline of the coat. Iron the allowances. Turn the piping up and sew the seam allowances as close to the chipped seams as possible. Then turn it down.

Step 7

Connect the stitch details with a stitch, sew the front and elbow seams of the sleeves. Sew in the sleeves, attach the shoulder pads and the strap detail to the coat, and sew the lining. Sew your coat. Overcast buttonholes, sew on buttons.

Recommended: