How To Make A Postcard-chocolate On February 23 With Your Own Hands

Table of contents:

How To Make A Postcard-chocolate On February 23 With Your Own Hands
How To Make A Postcard-chocolate On February 23 With Your Own Hands

Video: How To Make A Postcard-chocolate On February 23 With Your Own Hands

Video: How To Make A Postcard-chocolate On February 23 With Your Own Hands
Video: ОТКРЫТКА на 23 ФЕВРАЛЯ своими руками. Звезда из бумаги поделка. КАРАНДАШИ И КРАСКИ 2024, April
Anonim

What to do with your child as a gift for grandfather or dad on February 23? For example, an original surprise card. This is not just a handicraft made by the hands of a child, but also a practical gift - there is a delicious chocolate bar inside the card.

Postcard for February 23
Postcard for February 23

It is necessary

  • - cardboard or thick paper 260 g / m2.
  • - thin white paper
  • - simple pencil
  • - eraser
  • - scissors
  • - ruler
  • - stationery knife
  • - instant coffee or brown paint
  • - colored cardboard
  • - design paper with a picture
  • - tricolor ribbon
  • - a piece of rough tissue
  • - green satin ribbon (5 mm)
  • - artificial flower
  • - kraft paper
  • - glue "Moment" universal
  • - double sided tape

Instructions

Step 1

A thick sheet of paper or cardboard must be drawn in such a way that you get a postcard 16.5 cm high, 8.7 cm wide with a spine of 1.3 cm and a pocket measuring 8x8 cm, 1 cm high. Leave 1 cm on the fold in the pocket from three sides.

making a drawing
making a drawing

Step 2

Cut out the details of the future postcard. Before folding the paper in the right places, you need to slightly cut the top layer of it. To do this, we apply a ruler at the fold and very easily draw with the tip of a clerical knife along the paper. We only need to scratch the top layer so that the fold is smooth and beautiful. Excess pencil lines can be removed with an eraser.

cut the folds
cut the folds

Step 3

We bend the blank of the postcard so that we get a spine. Bend the edges of the pocket and glue it to the inside of the card on the right.

glue the pocket
glue the pocket

Step 4

We glue satin ribbons on the front and back surfaces of the postcard.

Image
Image

Step 5

On the front side of the postcard, glue a rectangle made of colored design paper. You can use available materials for this, for example, a gift bag, a cover from a notebook, a sheet from a magazine. The main thing is that there is a beautiful suitable color.

On the back side of the postcard, glue a rectangle of colored green paper.

glue colored paper on the front side
glue colored paper on the front side

Step 6

Cut out a small envelope from craft paper (about 5x3 cm). We fold it and glue it. Inside the envelope, insert a piece of paper with the inscription "Congratulations on February 23!" The inscription can be printed on a printer or written by hand.

making a small envelope
making a small envelope

Step 7

Glue a piece of matting or other suitable material to the bottom of the postcard. It can be a piece of camouflage or denim.

Glue an artificial flower on top. You can use strips of paper with glue or a glue gun.

glue the decor
glue the decor

Step 8

Glue an envelope with congratulations on top.

glue the envelope
glue the envelope

Step 9

Cut out three stars of 3, 4 and 5 cm from colored cardboard or design paper.

First, we glue two of them, then we add a ribbon with the colors of the Russian flag, and on it we glue the largest star.

cut and glue the stars
cut and glue the stars

Step 10

We print a congratulatory rhyme on the printer, which will be glued inside the postcard. If you write congratulations by hand, then the paper will need to be tinted first. The sheet is tinted with instant coffee. Coffee gives the paper a vintage look and a light, pleasant aroma. If you don't have a pinch of coffee, you can use regular brown watercolor paint.

We also tint a small square of paper (8x8 cm), which we glue on the pocket.

For greater decorativeness, you can scorch the edges of the sheet over a flame.

we print and tint congratulations
we print and tint congratulations

Step 11

We glue the congratulations on the inner left side of the postcard, and glue the tinted square on the pocket. It is more convenient to use double-sided tape instead of glue.

You can ask your child to draw a tank on green paper. It will need to be cut and glued.

You can make a signature on the free part of the sheet.

Recommended: