In order to understand whether you are biting or not, you can use various types of signaling devices. They allow you to use several tackles at the same time, even in the dark, without fear of missing a bite. How to make a bite alarm yourself?
It is necessary
- - bell or bell;
- - clamp;
- - metal balls;
- - sleeve;
- - jigsaw;
- - sandpaper;
- - fishing line;
- - silicone tube;
- - wooden stick;
- - building hair dryer or gas burner;
- - catalytic firefly.
Instructions
Step 1
For the simplest signaling device, take a bell or bell (they are sold in any fishing store). Clip it to the tip of your spinning rod or rod and lock it stationary. When biting, you will hear a characteristic ringing.
Step 2
To guess which rod the sound is coming from, attach different bells. You can make them from spent cartridges, for this, cut the cartridges of different sizes in half, carefully sand the edge so that it is smooth. Then attach a metal clip to it and add one or more metal balls inside.
Step 3
If fishing with a donk during the day, tie a piece of line to the base of your tackle (wood, plastic or metal). Thread the free end through the eyelet on the bell and attach to the main line. Make a slight slack. The signaling circuit is the same.
Step 4
For fishing at night, prepare a 20 cm piece of transparent silicone tube and a 15 cm long wooden stick. Sand it so that the end of the tube fits snugly over it.
Step 5
Heat the nozzle with a construction hair dryer or gas (be extremely careful). When it feels soft, slide it about halfway over the piece of wood. When everything cools down, the silicone will hold firmly in place.
Step 6
Insert the catalytic firefly inside. It will glow in the dark and you can see its vibrations. Put the structure on the line behind the first guide ring and fasten the alarm on the fishing rod by pulling the free end of the tube over the remaining stick. Make the ring hang down and move upward with minimal tension. Add lead pellets to the tube to adjust the weight of the alarm. When biting, proceed as usual, the ring will not interfere and will remain on the line.
