Jewelry is not only an addition to the image, it reflects the inner world and the mood of the owner. You can choose jewelry in the store, or you can make it yourself. This requires imagination and inspiration for creativity. The main thing is that such a decoration will be unique and unrepeatable.
It is necessary
- For a four strand necklace:
- - beads;
- - beads;
- - cord (lanka or fishing line);
- - locks;
- - clamps;
- - pliers;
- - wire cutters.
Instructions
Step 1
You can make a new necklace from old beads and beads, or you can buy accessories in a store or make beads yourself. To do this, blind them from plastic, paint them in the desired color and make a through hole with a thick needle or awl.
Step 2
For convenience, pour the beads into different containers (bowls, lids), and arrange the beads by color.
Step 3
Measure out the lanyard or cord to the required length and cut. For clarity, place the beads on the table in the intended sequence to understand and see how your necklace will turn out.
Step 4
Place the center bead on the lanka or cord. Then string the beads symmetrically from one end of the lanka to the other. From time to time, dab a thread around your neck to check how it will look and if the necklace turns out as intended.
Step 5
Do not forget to subtract the length of the lock from the length of the lanka or cord. When you are finished with one thread, attach the clip and slide the end of the lanyard or cord into it so that you get a loop on which to fasten the clasp.
Hide the end of the lanka under the beads or the last beads.
Step 6
For the second strand, lay the beads on the table, and then start stringing them onto the lanka. Periodically apply the second thread to the first (already finished), so that if necessary, the necklace can be corrected. It looks good when large beads of one strand are parallel with small beads or beads of the other.
Once you've finished the second strand of the necklace, attach it to the clasp.
Step 7
It will look beautiful if you twine two beaded threads with beaded threads.
Measure a double length from the tongue and immediately make a loop at one end using a clip and pliers. Then start scrupulously stringing beads on it, choosing colors and shades.
Make a loop at the other end.
Step 8
Spread the ready-made threads on the table and carefully interweave the threads with beads with beaded ribbons. Cut off excess threads and attach to the lock.
