The process of making toys with your own hands is always interesting. It can be especially interesting if you decide to make something unusual, for example, a rocket. The toy rocket will delight not only your child, but also you. It can be made in several ways, one of which is given below. The easiest way is to glue the rocket from a sheet of Whatman paper, then paint it with felt-tip pens and paints.
Instructions
Step 1
First, take thick paper or thin cardboard, then glue the tube from it with PVA glue. Let the diameter of the tube be 1.5 cm. This tube will be needed for the launcher. Now cover one end of the tube with tape. This will increase the lifespan of your launcher.
Step 2
Next, glue the second, exactly the same tube made of paper or cardboard, making it 1 mm larger in diameter than the first tube. Color it the way your heart desires. Now glue the cone separately from the semicircle, then glue it to the top of the larger diameter tube. Outside, the rocket tube must be sealed with a cone.
Step 3
Next, cut out the stabilizers from the same Whatman paper, glue them to the tail of the rocket, put the rocket on the launcher with the free end, and then blow into the end of the launcher that is sealed with tape - the rocket should take off.
Step 4
True, so she will fly not far. You can fix this. To do this, you need to complicate the design of your launcher. Use a conventional pump as it, which supplies air to the tube after pressing the pedal.
Step 5
It is possible to further complicate the launch of a rocket by making a remote launcher. Take the hose that goes straight to the angled rocket, as well as a water ball valve, a balloon, a blood pressure monitor, a plywood box, a plastic pipe, boards, and threads.
Step 6
Next, drill a couple of holes in the box. Insert a plastic tube into one of them, and a sleeve from a piece of a fountain pen into the second. Now, from the inside of the box, attach a balloon to the end of the tube using threads. Fasten the tube, and the tap with the fitting to make an adapter for the hose.
Step 7
The trigger will act like this: air will be injected into the balloon, then the crane will turn, and the air flow will be directed to the rocket, giving it the necessary starting force.
