Very often you want to please your child. But how to do that? One of the best ways is to teach him how to make paper airplanes. It should be noted that the assembly of airplanes is interesting not only for children. There are people for whom this is a hobby.
It is necessary
paper, pencils, scissors, stationery knife, PVA glue, felt-tip pens, ruler, fishing line
Instructions
Step 1
Make a drawing of your future airplane. Take this step very carefully. It is best to take plain paper and draw an airplane drawing on it. After that, cut out all the necessary parts and try to assemble the model. You will create a draft. When making it, you can afford a little sloppiness. The main thing is that the main parts dock without distortions.
Step 2
If you succeed in the rough version, then you can proceed to the manufacture of the finishing workpiece. Draw a drawing. Circle the lines along which you will cut the workpiece with a red pencil or felt-tip pen. After that, carefully cut the workpiece along the red border. Try on without glue: everything should fit evenly together.
Step 3
Now it's time to think about the war paint for your unit. You can paint an already assembled model, but it is much more difficult. Therefore, it is best to color the workpiece. If you are using paints, do not overdo it, as too much moisture can negatively affect the workpiece, and it will begin to curl. After painting, let the workpiece dry thoroughly.
Step 4
While the workpiece is drying, you can start making the protruding parts of the aircraft. These can be wings, landing gear, antennas, turbines. They also need to be colored, observing the color of the entire model.
Step 5
Start assembling the model. Never use office glue. It leaves unsightly yellow spots. PVA works best. Glue very carefully and carefully. Remove the protruding glue with a piece of paper or a cloth, being careful not to smear it on the part. Take your time, glue the model progressively, allowing the glue to seize. After assembling the main workpiece, glue all the parts and let them dry.
Step 6
Your model is ready. It remains only to find her proper place. Make a stand for it if you want to place the model on the shelf. You can also attach a thin line and hang it around the room. Then there will be an illusion of an airplane hovering in the air.
