You can make a lot of things out of paper, like a ball. The easiest way to make a paper ball is to simply crumple up several sheets of paper overlaid on top of each other. These balls bounce better off the floor.
It is necessary
12 sheets of A4 paper (for a small ball, respectively 6 sheets)
Instructions
Step 1
The sheet is cut in half. You need to make a square out of each half. Next, a pentagon will be made from the square. It needs to be folded in half with a scarf. Then again in half and unfold. Lower the top of the resulting triangle down and unfold. Next, lower the vertex to the intersection of the two lines, smooth the fold line and unfold it again. A line appears connecting the edge of the top line to the base point of the perpendicular. Bend along this line.
Step 2
Fold the left edge over the right edge. Then wrap two layers of paper to the right again over the previous folds. A line should be drawn using a square, but it must be borne in mind that the angle must be 90 degrees. This line has turned out, but you need to cut it 5mm lower. It turns out a detail.
Step 3
Next, a petal is made. Then you need to retreat from the edge 5-7 mm. Near the folds, you should retreat half as much. An incision is made. Bend inward along the dotted line. Then bend the parts along one lines outward, and along others inward. The tops of the cut, raised up petals must be glued in pairs. This will result in a module.
Step 4
Next, you need to glue six modules, five are glued together as a pentagon and one in the middle. You also need to glue the other six modules. And then glue the two hemispheres.
