The jacket consists of several parts - two shelves, one back, two sleeves. First of all, you need to reshoot or draw a pattern of parts of the product. After the base is ready, you should determine exactly where the American flag will be located. It can be found on the top of the right or left shelf, on the side of the sleeve, or on the back. In the first and second cases, the emblem will be small. Third, this US attribute will be large.
Instructions
Step 1
Start with a pattern to make the jacket fit and fit well. If there is nowhere to reshoot it, do it yourself. Take measurements from yourself, determine the semicircle of the chest and hips in front and behind. To do this, wear anything that fits your figure and has side seams. Lean the beginning of the measuring tape against one of them, pass it across the chest, stop at the side seam on the other side. This is a measure of the semicircle of the chest. Take other measurements in the same way.
Step 2
Place a tape measure at the intersection of your neck and shoulder, bringing it to the highest point of your chest. Put the resulting value on paper. Next, from the point of the chest (A), lead it to the middle of the thigh (B). Transfer this to the pattern too. You now have a two-piece vertical line. Divide the semicircle in half. Through "A" draw a horizontal line equal to this value. From "B" draw a horizontal segment equal to half the semicircle of the thighs. At the top, draw an oblique shoulder line, having previously measured it, mark on the left a semicircular hole for the arm. You have drawn the left shelf. Knit the right mirror. Using this technology, make a pattern of a one-piece back and sleeves.
Step 3
After you have made a pattern, have found out the knitting density, dial the required number of loops to create a shelf. Start knitting with an elastic band, then, with the front satin stitch. When you get to the place where you want the American flag to be located on the jacket, first draw it on checkered paper. Draw a rectangle, divide it into 13 equal horizontal stripes. Place a dot on the seventh left strip from the bottom. Lead a line from her to the right, then up. It is in the flag that you drew a square, which you will fill in blue. Stripes, starting from the bottom, through one, sketch in a red pencil. The white stripes will remain unhatched.
Step 4
Looking at the drawing, recreate it on the jacket. One cell of the leaf corresponds to the loop. First, knit the required number of loops with red threads with the front stitch. In the next purl row, purl with the same thread. Next - a row of facial ones. Twist the red thread with the white yarn and knit 3 rows with the already light thread. Then, red again. After the third white knitted strip in the left corner, knit with blue thread. On the right, continue creating stripes. So that there is no break between the blue square and the stripes, just twist the thread before starting to knit the US flag with it.
Step 5
According to the pattern, create all the other details, tie 2 planks with an elastic band, making yarn on one in the center - these are the holes for the loops. Sew the strips into place, sew parts of the product, attach the buttons. Thread a white thread into a needle with a large eye, embroider stars on the blue part of the paraphernalia. The knitted jacket with the American flag is ready.
