A headband decorated with flowers is an incredibly beautiful accessory that is suitable for creating feminine romantic looks. If you do not have such a product in your arsenal, then try to make it yourself at home, taking as a basis a simple bezel of medium width without decor.
It is necessary
- - polymer clay;
- - oil paints in white, yellow, green and blue;
- - tape tape (in the color of the satin ribbon);
- - glue;
- - bezel;
- - blue satin ribbon;
- - thin silver wire.
Instructions
Step 1
Take the bezel, coat it with glue (it is better to use hot glue), then carefully wrap it with a satin ribbon in a spiral, trying to wind the ribbon as evenly as possible so that the bezel itself is not visible (you need to start gluing from one end of the product and wrap it to the other end without interruption).
Step 2
Next, take polymer clay (the amount of material depends on how many flowers you will make), divide it into three parts. Add blue paint to one part, white to the other, green to the third, then remember the pieces in your hands so that the paint is evenly distributed (you need about a pea of oil paint on a walnut-sized piece of polymer clay).
Step 3
Cut the wire into pieces of five centimeters, at the end of each make a tiny loop (you need to bend the tip of the wire down with tweezers).
Take a small piece of yellow clay in your hands and roll a pea. Connect it to one wire by attaching it to the eyelet. It turned out the core of the flower.
Step 4
Take a pea-sized piece of white clay in your hands and roll it so that you get a droplet shape. Take the resulting droplet in your left hand by the narrow edge, then carefully cut the part cross-to-cross with sharp scissors.
Press each of the resulting four parts with your fingers to make thin "petals", then connect the resulting part with the core.
Step 5
Take a pea-sized piece of green clay in your hands and roll it into a drop. Cut it in exactly the same way, not four parts, like the previous workpiece, then just bend the resulting "leaves" to the sides, without pressing them with your fingers.
Connect the blank (receptacle) with the flower, having previously missed the flower itself on the outside of the lower part with glue.
Make the required amount of white and blue colors in the same way.
Step 6
Next, start assembling the bezel. Place one flower on the headband and wrap it with tape, then add a second flower and rewind it. Thus, attach all the flowers, trying to put them on the rim as close to each other as possible so that the tape is invisible.
Thus, you can decorate both the entire rim completely, and only a part of it.
