Before you go fishing, it is important to put all the tools in order and equip the spinning rod. It has several very important parts that need to be adjusted with simple and powerful instructions.
It is necessary
- - Spinning;
- - fishing line;
- - brake;
- - coil;
- - spring scales;
- - leash.
Instructions
Step 1
Lighten the coil. To do this, wind only the most necessary minimum of fishing line on it. If you have a spinning reel, consider how much line will be on the spool. The level of the coiled line should be approximately 3-4 mm below the edge of the bead. In this case, the retreat will be great! Use cork spacers to avoid making the rig heavy. Wrap the line so that it protrudes 2 mm from the bead of the spool.
Step 2
Adjust the brake. To do this, use a spring-loaded watch. Determine its strength and test them. In fact, fakes of this nature are quite common.
Step 3
Now calculate the brake adjustment force. If you are using a 0.24mm strand that can support 5.8kg of weight, then the braking force of the line should not be more than 4kg.
Step 4
Check the brake after setting it to a suitable value. The brake settings correct for differences from the set values. If suddenly the line breaks before the brake reaction, this means that the losses exceed 30%.
Step 5
Attach the vein to the spool drum with a simple knot. Tie the bait to the main line using a simple method: wet the knots as you tie them (do this with hot water if the line is bulky). This procedure will reduce the degree of deformation of the knot and make it much more dense.
Step 6
Place the tackle on a line that will allow you to catch the catch without using a landing net. In the case of spinning, it is not always possible to carry a landing net with you. Set the correspondence between the mass of the bait and between the line. It is something like this: 8g at 0.25mm, 20g at 0.3mm, 40g at 0.35mm.
Step 7
Track the length of the leash. It should be no more than 2 cm. Attach fasteners or carabiners to it on both sides. You need the line to be thicker than the leash. Otherwise, it will simply be cut during posting. The leash is an important thing when fishing for predatory fish, especially pike.
