How To Glue The Background To The Aquarium

Table of contents:

How To Glue The Background To The Aquarium
How To Glue The Background To The Aquarium

Video: How To Glue The Background To The Aquarium

Video: How To Glue The Background To The Aquarium
Video: Best way to paste Aquarium Background || No BUBBLES in aquarium background if pasted like this 2024, December
Anonim

No matter how beautiful the living plants in the aquarium are, a special artificial background will give the effect of expanding the space and make the design richer. A roll-up background film is very convenient in this respect.

How to glue the background to the aquarium
How to glue the background to the aquarium

It is necessary

1 roll of background, pack of JBL Fixol glue or 25 ml glycerin, scotch tape, glass cleaner, sponge

Instructions

Step 1

First, the purchased aquarium background is adjusted to the size of the rear window, minus one centimeter on all sides, the excess is cut off.

Step 2

Then the rear surface of the aquarium is thoroughly cleaned from dirt. This is done with a sponge dipped in glass cleaner.

Step 3

It is better to use JBL Fixol as an adhesive. With it, the background film will last for a very long time. If there is no such glue, then you can use glycerin, it is freely available in the pharmacy. With a special spatula, which is included in the kit, the glue is evenly distributed over the entire glass.

Step 4

Apply a background for the aquarium and smooth it out so that all air bubbles are squeezed out, otherwise they will ruin the whole design. Wrap a cloth over the spatula very well. You can replace the spatula with a straight piece of cardboard.

Step 5

If the aquarium background film is twisted at the corners, then it is temporarily fixed with tape.

Step 6

Wipe off glue squeezed out from the edges with a sponge. For reliability, glue the background around the entire perimeter with adhesive tape. Now the aquarium looks much prettier.

Recommended: