So that the openwork dress is not too provocative, put on a simple combination under it. It can match the color of your skin tone or be combined with the color of the dress. The price in the store for this product may not suit you, and it is quite simple to sew the combination itself.
It is necessary
- - light flowing fabric;
- - oblique inlay;
- - needles and threads;
- - sewing machine.
Instructions
Step 1
After pre-ironing the fabric with an iron and a steamer, lay it out on the worktable. A simple model of a combination can be sewn without a special pattern, simply by choosing a successful model of a sundress that fits well on you
Step 2
It is best to cut the fabric obliquely to create attractive drapery waves. Make the allowances for the seams in the cuts of the armholes and necklines small - half a centimeter is quite enough, because you will be edging these cuts.
Step 3
The bottom of the product can be zigzagged, folded or edged with an oblique inlay, so leave different allowances accordingly
Step 4
Sweep and stitch the side seams, overcast their cuts. Iron the seam first closed and then open on both sides. If you process it in this way, the product will fit well on the figure, there will be no irregularities on the sides.
Step 5
Baste the bias tape to the neckline and armholes, stitch it exactly along the edge. Treat this work with care and accuracy to make a clean, beautiful stitch
Step 6
The straps can be made from the same bias tape by simply continuing to guide it from the neckline. Try on a combination, mark the length and location of the straps on the back.
Step 7
Choose the way in which you will process the bottom of the product. When processing "zigzag", a very playful fold-wave is obtained, when hemming - the most simple inconspicuous edge, when edging - an elegant decorative bottom of the combination
Step 8
To make a neat zigzag seam, bend the cut by 4-5 millimeters, adjust the zigzag stitch on a piece of fabric to a small, frequent step. Stitch along the edge of the combination, and cut off excess fabric from the inside with small, sharp scissors.
Step 9
Iron the finished product with a steamer. The combination can be decorated with small satin bows or flowers along the neckline. Decorate the bottom of the product with lace, make a curly asymmetrical cut.
