Eastern exoticism is becoming more and more popular in our area, and now it is difficult to find a restaurant that does not offer hookah smoking for money. Many people buy hookahs for home use, but high-quality imported hookahs cost a lot, and lovers of oriental flavors have to spend at least a hundred dollars. You can save money and make a hookah from improvised items, as the principle of its construction is quite simple.
Instructions
Step 1
Use a metal teapot or similar container instead of a flask. To smoke, use a regular shower hose, or purchase a special hookah hose from a specialist store.
Step 2
For a hookah shaft, purchase a 30 cm long steel pipe, a gas stove burner and a metal strainer, which is usually installed in the kitchen sink. You will also need a soldering rod to join metal surfaces.
Step 3
Connect the metal tube to the gas burner, making the connection airtight. Connect the opposite end of the tube to the lid of the teapot. To do this, remove the handle from the cover and drill the hole to match the diameter of the metal tube.
Step 4
Make two solder grooves on the tube, and then immerse the tube into the kettle at a low height, reinstall the lid, and solder to the lid of the end of the tube. Then open the lid and repeat the same on the other side to make the tube-to-lid connection secure. File the seam with a file.
Step 5
Attach a shower hose to the spout of the teapot. To do this, saw off the tip of the spout and install the hose inside. Tightly wrap the outside of the connection with insulating tape. Put a metal nut on top of the spout of the kettle.
Step 6
Seal the joints of the kettle with the lid with foil, then install a funnel made of foil for tobacco into the gas burner. Place a metal strainer on the hotplate. Now you can light up the hookah and test it for performance.
