For people who are engaged in professional sewing at home, as well as as a hobby, it is known that the uniformity of the stitching, the execution of beautiful stitches without annoying omissions depends on how the threads are threaded into the overlock. A person who wants to achieve good results in his hobby needs to have certain ideas about the correct preparation for using his working tool - an overlock.
It is necessary
the thread number (size) and the number (size) of the needle used for sewing
Instructions
Step 1
Take a work spool of thread and place it on the spool seat.
Step 2
Pass the end of the thread through the holes or hooks of the thread guides (it is important that the spool pin axis points directly to the thread guide, otherwise the stitch may break or the stitch quality deteriorates).
Step 3
Pass the thread through the tension mechanisms: in the specified sequence, first pass through the thread guides that take the thread during the operation of the machine, then through those that attract (in some models of sewing machines, this is one mechanism).
Step 4
Now pass the thread through the eye of the needle.
Step 5
After all the above steps, insert the thread into the looper holes (there can be two or one). Make sure that at the exit the thread is directed in the direction of the fabric movement.
Step 6
When the threads have been threaded according to the previous guidelines, bring them under the presser foot on the left, holding them with your hand over the presser foot until the first stitches appear. If one thread is threaded (in case of breakage), then it is not necessary to bring it under the left foot. You can simply turn the pulley over, sew a few stitches on the taper finger of the pressure piece, and continue sewing.
