Tattooing is an ancient art that is widespread today. Many masters of decorative body modification began their careers with the application of the simplest drawings using machines made on their own.
It is necessary
An electric motor (a mechanism from a Daewoo or Sharp tape recorder is best), a power supply (you can use a mobile phone charger), flexible wires, a switch, a metal handle or tube, aluminum wire (section 0.5 mm), a soldering iron, electrical tape, adhesive plaster, adapter, any "L" shaped part (for example, a hexagon)
Instructions
Step 1
Turn on the soldering iron and use it to connect one part of the adapter to the electric motor.
Step 2
Cut off the plug at the charger and solder the switch and the other part of the adapter.
Step 3
Attach the metal handle to the hex (long side) with electrical tape. Attach the motor to the short side. The mount should be tight.
Step 4
Cut a piece of wire slightly longer than the metal handle and bend the end.
Step 5
Attach the needle to the other end of the wire using glue or tape.
Step 6
Insert the short folded piece of wire into the hole on the pulley.
Step 7
Apply adhesive tape to the handle to prevent slipping.
