These bracelets made of zip fasteners can be made very simply and quickly, and they will suit many outfits.
Studded bracelet
For the first bracelet you will need: a zipper, a carabiner for jewelry, any rivets or spikes you want (the number depends on their size).
1. Check that the length of the zipper is long enough to fit the bracelet on your hand (the average length of the bracelet can be 14-18 cm, but this is individual). Cut off the excess zipper if necessary.
2. Place the rivets on the zipper fabric close to each other. If you purchased small rivets, place them in several rows, as long as the width of the fabric is sufficient. Carefully poke through the fabric with the rivet feet and fold over the back.
3. Sew a carabiner fastener to the ends of the fabric or attach a special holder to it (as in the photo), and then attach the fastener to it.
Bracelet with chain
For this bracelet you will need a zipper, a piece of a wide chain (the length of the chain should be equal to two lengths of the future bracelet), a carabiner for jewelry, glue.
1. Make sure the zipper is the right length for the bracelet.
2. Glue the chain segments near the teeth.
3. Sew a carabiner clasp to the ends of the bracelet or attach a special holder to them, and then attach the clasp to it.
you can hang some decorative element to the zipper, for example a piece of chain, a small pendant.
