Once upon a time, in Soviet times, such puzzles were widespread and very popular among both adults and students of institutes and high school. The solution to the proposed problem is to remove one metal component from the other without unbending or breaking the wire figures. The undoubted advantage of such a puzzle is its durability (it is almost impossible to break such a structure). The benefits of it are also obvious: the development of spatial thinking, training perseverance and accuracy.
Instructions
Step 1
To remove the figure in the puzzle, insert the tongue of one into the ring of the arc of the other, circling the tongue around the ring. In the opened crossbar, remove this figure from the other.
Step 2
To separate the "Boots" shape, thread one nose of the smaller boot into the ring and circle the ring with it. After such a procedure, the parts are easily separated.
Step 3
The components of many other puzzles are removed according to the same principle. Insert the first shape with one eye into the ring of the darling with the other. Pass the ring of the rod through this eyelet and pull the released figure out of the ring of the bow.
Step 4
There is another way to free the ring of one of the figures from the capture of the other. Slide the ring of the first piece down and slide it over a piece of the other wire structure. Together with the ring, move the second part along the arc of the first, closer to its upper half. Rotate the arc of the second piece so that it overlaps with the first piece. Now the ring will freely pass immediately around the arc of the second and part of the first and will be removed from the puzzle.
Step 5
Also, in puzzles, it is possible to move the bow of the first figure along the rod of the second so that one end of it goes around the curvature of the rod. Then the ring freely passes through the bend in the rod and the bow first at the same time and is removed from the rod.
Step 6
To solve such a puzzle, you need to put the bow on the bow and slightly "skew" them. Now pass the ring between the legs of the temples and move it down, then up. This will remove the ring.
Step 7
In order to remove the "shuttle" from the spiral, bring it to the loop and, turning it, pass the spiral at the same time through it. Now remove the "shuttle" from the loop and free it from the spiral.
