A car radio is today an indispensable attribute of any car, bus and even a tractor. When traveling and when working as a chauffeur, on vacation and in everyday traffic jams, the car radio allows drivers and his passengers to enjoy wonderful melodies, thereby brightening up their stay in the vehicle.
Instructions
Step 1
Modern car radios are far from the ones that were several decades ago. They allow you to listen to your favorite music not only on radio frequencies and cassettes, but also using CDs and DVDs, flash drives, memory cards. However, the management of such radio tape recorders is quite difficult, and often motorists do not know how to enter the code into the radio tape recorder to make it work. We decided to talk about this problem in this article, namely, how to enter the code into the car radio of a Volkswagen car.
Step 2
VW Delta car radio Switch on the car radio. CODE appears on the display. Enter using buttons 1, 2, 3 and 4, pressing each of them several times, the correct code. Press the up or down arrow when the correct code appears. The radio is on.
Step 3
VW Alpha CC car radio Switch on the car radio - SAFE will appear. Press the TA and TP buttons at the same time and hold until the number 1000 appears on the display. Enter the correct code with buttons 1, 2, 3 and 4. After the correct code appears, press the TA and TP buttons and hold them for a few seconds. All Beta car radios are switched on in the same way.
Step 4
Car radio VW Gamma III Turn on the car radio - the inscription SAFE appears. Press buttons M and VF at the same time and hold until the display shows the number 1000. Enter the correct code using buttons 1, 2, 3 and 4. After the correct code appears, press the M and VF buttons and hold them for a few seconds.
Step 5
By the same principle, the code is entered into all radio tape recorders of the Gamma and Premium series. In some of them, the M and VF buttons replace TA and TP.
Step 6
VW Sound 2 car radio Switch on the car radio. The inscription "CODE - - -" appeared. Enter the correct code using buttons 1, 2, 3 and 4. Press the SELECT button after the correct code appears and hold it for a few seconds.
Step 7
VW Newbeetle car radio Switch on car radio - SAFE will appear. Wait until the display shows 1000. Enter the correct code using buttons 1, 2, 3 and 4. After the correct code appears, press the ">>" button and hold it for a few seconds.
Step 8
VW Deluxe Audio car radio Switch on the car radio. - the inscription CODE IN appears. Enter the correct code using buttons 1-6. After the correct code appears, press the MODE and SCAN buttons at the same time. Hold the buttons for 5 seconds.
