A monocle is not only an optical device that is worn on a chain and inserted into the eye to see something. Today, when it comes to a monocle, we mean a camera lens that gives interesting effects. In fact, all the effects of a monocle are what lens manufacturers are trying to get rid of with all their might - distortion, all kinds of aberrations, and others. But all together they give an extremely interesting image. Every amateur photographer will be able to make a monocle on his own.
It is necessary
Helios 44-2 lens, M42 mount adapter
Instructions
Step 1
The easiest way to make a monocle is using the Helios 44-2 lens on the M42. This lens is standard for Zenith cameras, but no matter what you shoot, there are adapters for the M42, so you can use the resulting monocle on any camera. Helios 44-2 is the most convenient for creating a monocle of all the lenses of the Helios 44 series. Besides, you can often find it at flea markets, it is very affordable and inexpensive.
Step 2
Disassembling the lens is a very important step in creating a monocle. First, you need to remove the rear locking ring, which secures the lenses inside the lens itself. This can be done with a thin slotted screwdriver or watch tweezers. There is no need to try to disassemble the tube itself.
Step 3
In the process of disassembly, the first thing to do is the lens behind the lens. Then turn the lens over and shake it a little. All other lenses will fall out. Be careful not to scratch the inside of the tube, as this will affect the quality of the resulting photos.
Step 4
Next, you need to disassemble the lens from the front side to turn the lens over. You don't have to do this, there is no unequivocal permission. Some people think that the lens should be flipped, others that it should not. On the front, unscrew the nut that says "Helios". You will see two rings, one of which is a safety ring and the other is a bushing.
Step 5
The front lens falls out by itself, you need to take it out and insert it vice versa. Then the lens should be clamped with a locking ring, and the front part should be screwed back.
Step 6
Many people recommend making an external diaphragm for the resulting monocle. A sheet of thick cardboard or dark plastic is suitable for this.
