To view 3D images, you cannot do without special glasses. Anaglyph stereo glasses can either be bought or made with your own hands. When making glasses yourself, the main thing is to make the frame correctly and install lens inserts into it.
It is necessary
- - cardboard;
- - personal computer with Internet access;
- - Printer;
- - disposable syringes;
- - paper;
- - glue;
- - scissors;
- - a file for paper;
- - markers;
- - ruler;
- - pencil;
- - color cartridge;
- - tweezers;
- - glass;
- - cargo.
Instructions
Step 1
Make a frame for glasses out of thick cardboard. To do this, download the diagram of anaglyph stereo glasses and print it. The diagram consists of two parts: the left side of the glasses is blank A and the right side is blank B.
Step 2
After that, stick the printed circuit on the cardboard, and then cut out the blanks for the frames. Bend the temples (cardboard side facing lenses).
Step 3
Prepare colored lenses. To do this, cut out two rectangles from the paper file (each size: 9 by 5.5 centimeters). Color one rectangle evenly with a red marker and the other blue.
Step 4
Fold the rectangles in half. The colored part should be inside: this will prevent the paint from rubbing off and also protect your eyes from microscopic pigment particles.
Step 5
Colored lenses can be made in another way. To do this, take the color cartridge from the inkjet printer and carefully open it. Then, using tweezers, remove the foam sponges and place them inside the disposable syringes.
Step 6
Cut four rectangles (4.5 by 5.5 centimeters each) from transparent film with a "gelatin layer" for inkjet printers. Then squeeze purple and yellow paints onto a flat glass surface and mix them (you get a red color). Squeeze some blue paint onto the second glass.
Step 7
Place the rectangles cut from the film on top of the paint, gelatin downward (two rectangles for each color). After that, connect the quadrangles with the painted surfaces inward. Then place each of these double rectangles between the white sheets and place a flat weight on them for several days.
Step 8
Glue the front side of workpiece A with glue, then attach the insert lenses (red on the left and blue on the right). Then glue the inside of workpiece B with glue and attach it to part A.
Step 9
Place the glasses under the load and leave them to dry completely. Now all that remains is to download the 3D movie and experience them.
