All cars and special equipment that are produced on the basis of the chassis of the same name are called KamAZ. The type of these machines is very different, these are concrete mixers, and road equipment, and cement trucks, and dump trucks, and truck cranes, and fire trucks. They have one thing in common - the shape of the chassis and the type of cabin.
Instructions
Step 1
Begin your drawing by constructing construction parts. You need to draw a rectangle with sides proportions 2 to 3, its base should be shorter than the side. Draw a horizontal line at the base of the rectangle. Its length depends on what kind of body you want to depict, if the car has six wheels (bitumen truck, concrete mixer), its length should be three times longer than the base of the rectangle corresponding to the cab. If the machine is equipped with four wheels (truck cranes), the platform length may be somewhat shorter.
Step 2
Draw the wheels of the car. The diameter of each is approximately half the height of the rectangle corresponding to the car. The center of the circles is located slightly below the base of the cab and the platform line. The first pair is located under the cab closer to the edge where the frame begins. In a car with three pairs of wheels, the last two are located at a short distance from each other closer to the rear of the chassis.
Step 3
Select the details of the cockpit. Bevel the front at the top first. The window makes up about 40% of the cab surface, its side part is divided by thin strips. Don't forget to outline the outline of the door and draw the mirrors. If you are drawing a front view of the machine, separate the bottom of the cab with a horizontal line. Draw rectangular headlights, sidelights, plant symbols in the center and the inscription "KAMAZ". Draw thin mud flaps behind the front wheels.
Step 4
Draw the chassis. You do not need to draw all the technical details of this device, they will be hidden by the shadow of the body, just select the massive gas tank.
Step 5
Choose which truck you want to draw. You can choose a normal tipper body, in this case draw a sloping line from the chassis to the top edge of the cab, the rear should be vertical. The body height is about half the cab, since it is located above the chassis, its top edge reaches the middle of the window. In addition to the usual body, you can draw a concrete mixer, a leveling excavator, a cement truck or a fire truck.
Step 6
Color in the drawing. For the body and cockpit, use bright colors - orange, red or yellow, make the rest of the details black.
