A candy in a beautiful wrapper is always more attractive. Come up with a frame for a surprise, make a gift wrapping yourself. This way you can put in some of your warmth. The person to whom the present is intended will feel it.
Idea for those with a sweet tooth
Such a packaging box will become a beautiful and unusual container for a gift.
You will need:
- colored paper, cardboard;
- long tape;
- needle and thread matching the color of the ribbon;
- plastic disposable cup;
- scissors, glue.
Progress
Cut the top off the plastic cup. Its final height should be approximately 5 cm. You can make it taller if the present takes up more space.
Glue a strip of paper (7 cm) vertically to the top of the cup. It will connect the lid of the box to the base.
A circle should be cut out of paper; its diameter should be about 1 cm larger than the bottom of the glass.
Now a strip is cut out of colored paper (or cardboard), its height should be 5 cm. It must be folded in an accordion, the step should not be too large. The smaller it is, the more attractive the result will look. If a strip of cardboard is not enough for you, then cut out another one. Then just glue both accordions.
Cover the bottom of the glass with glue, glue the circle cut out earlier. Now apply PVA to all the outer walls of the glass, glue the accordion around.
Now it remains to make the lid. You need to cut a circle out of cardboard, be guided by the size of the bottom of the package. Use scissors to make an incision on either side of the circle, it should reach the center point of the cardboard.
Form a cone. Glue the notch with an overlap.
Take a needle and thread, with their help "collect" the ribbon as shown in the picture. Next, glue it in a spiral.
Now the lid can be decorated with beads, beads, rhinestones.
It remains to fix the lid. Its inner part must be glued to the strip that was installed at the very beginning.
All is ready!
An idea for all time
The box-packaging looks original, but a big gift won't fit into it. It's a good idea to create a pre-cut packaging. All you need is to redraw it onto thick paper or cardboard, cut, bend the dotted lines and glue the structure. If you have a printer, then the task is simplified - just print the drawings on cardboard, you should not draw it by hand.
Now you know how to make paper gift wrapping!
