How To Make An Airplane

Table of contents:

How To Make An Airplane
How To Make An Airplane

Video: How To Make An Airplane

Video: How To Make An Airplane
Video: How To Make The WORLD RECORD PAPER AIRPLANE for Flight Time 2024, April
Anonim

Surely many people happily remember toys that they made in childhood from scrap materials that, it would seem, are not at all suitable for games. Among these toys are airplanes made from cigarette packs. If you have an empty cigarette package, do not rush to throw it away: you can give the pack a new life by making an original plane out of it, which will become an excellent toy and entertainment. In this article, we'll show you how to quickly turn a cigarette pack into an airplane.

How to make an airplane
How to make an airplane

Instructions

Step 1

Take a cigarette package, remove the foil from it, and then carefully disconnect all the flaps of the cardboard package, glue and unfold it. Cut the reamer of the box into several parts - separate the front and back walls, the base, as well as the side parts and valves.

Step 2

Bend the front part of the tutu so that its corners form the wings. The construction of the wings should be the same as that of a regular paper pigeon.

Step 3

Bend the back side of the pack slightly so that it takes the shape of a half-cylinder, and then cut on each side along the edges of the top and bottom, and bend the resulting four strips outward.

Step 4

Bring the edges of the upper folded sides together so that the bottom of the cardboard folds completely into a rounded cylinder.

Step 5

Make a narrow hole in the center of the fenders and insert the top of the cylinder into it, and then unfold the resulting insert to form the landing gear.

Step 6

Take the top of the pack (the lid and its valves), roll it into a cylinder. Put the inner cardboard from the pack in front of you, roll its sides into narrow cylinders, and in the middle part make a narrow slot to the middle.

Step 7

Turbines were formed from the inner part of the pack. Slip them onto the chassis. The top of the pack is the future tail of the plane. Insert it into the tail section of the main fuselage cylinder.

Step 8

From the sheet of foil that you previously removed from the pack, twist a narrow cone and insert it into the nose of the fuselage with the tip outward. Your plane from a cigarette pack is ready!

Recommended: