Every experienced angler knows that in serious fishing you cannot do without a spoon. Modern lures of sophisticated design are sold in fishing shops, but they cost a lot, and if you wish, you can make a simple lure with your own hands, using a minimum of materials and tools - for example, a processed and polished table spoon handle with drilled holes can become a good basis for a spoon.
Instructions
Step 1
You can also make a spinning lure using parts from old and worn out lures, as well as old baits, as materials.
Step 2
To create such a spinner, you need a main rod, on the ends of which rings are put on, and the center is a rotating brass bushing. A hole passes through the center of the sleeve.
Step 3
Use round nose pliers to create loops on the lure, and also make a staple with beads. Instead of bait wire, you can use a string or strand from the wire. Place the beads separating the staple and the lure so that the lure rotates around them without delay.
Step 4
At the end of the sleeve, place the first beads, place the spoon in the bracket, and slide the bracket over the roller. Then place the second bead and make a closing loop that resembles a crochet loop by wrapping the wire around the shaft several times.
Step 5
Apply a drawing to the finished spoon by applying a plastic mesh mesh to the material and applying colored varnish on top.
Step 6
Use a thick line with spinning lures, as too thin line will twist.
Step 7
For fishing in fast-flowing conditions, you can make lightweight spinners, without a metal base, using metal and glass beads.
Step 8
Attach a sinker at the end of the line, and a little higher - undergrowth with a spoon. Such a spoon will not twist the line. Complement the hook with a fly feather to increase your fishing efficiency.
