High-quality and reliable ski mounts, as well as their precise adjustment, are the key to your safety on the ski slope. The task of ensuring your own safety is extremely simple: buy reliable fasteners and learn how to properly adjust them. This will be quite enough for both a beginner skier and an advanced ski lover.
Instructions
Step 1
For the bindings to work correctly, you need to press the boot against the head of the bindings with a precisely calibrated force.
Look at least once how an experienced skier adjusts the bindings, and you can probably repeat the sequence of his actions.
Step 2
Your mount model may have a pressure indicator. This is a special mark that should be reflected in the window when the boot is inserted. If the mark appears, you have fixed the boot correctly.
If there is no such indicator, simply place the heel of the attachment so that the heel of the boot rests on the heel pedal.
Step 3
Insert the toe of the boot into the head of the bindings. After adjusting the mount under the boot, do not forget about the release force of the mounts. You install it with the adjusting screws. For adjustment, you can use the table supplied with the mounts. In the absence of such a scheme, use a time-tested calculation scheme: divide your weight by 10 and subtract 20% (% for beginners / senior skiers = 30, for advanced skiers = 0).
Step 4
Set the resulting figure on all scales and try. If the effort is not enough, you will immediately notice it, in this case, increase the number a little and experimentally find out your comfortable actuation force.
