The Rubik's cube is collected sequentially, in layers. When the first layer is assembled, you can start assembling the second.
Instructions
Step 1
Before starting the assembly of the next layer, you will need to hold the cube so that the first assembled layer is at the bottom.
Step 2
We find on the top layer such middle edge cubes, where there is no color that is the color of the top side.
Step 3
Rotating the top edge, bring the middle edge cube to the desired place, paying attention to the color of the central sticker of the adjacent edge.
Step 4
Before further rotations, set the cube so that the side where the middle edge cubes will change places looks at itself. In this case, the collected first layer should be at the bottom.
Step 5
If the cube needs to be moved to the second layer to the right, set the top face 90 degrees clockwise, raise the right face 90 degrees up, then alternately return the top and right faces to their place. Next, set the top face 90 degrees counterclockwise, rotate the front face 90 degrees counterclockwise, then alternately return the top and front faces to their place. The cube falls into place in the second layer.
Step 6
If the cube needs to be moved to the second layer to the left, set the top face 90 degrees counterclockwise, raise the left face 90 degrees up and alternately return the top and left faces to their place. Then we move the top face 90 degrees clockwise, raise the front face 90 degrees up and alternately return the top and front faces to their place. The cube falls into place in the second layer.
Step 7
After the middle ribs from the top layer are in place, the second layer will be assembled.