Erno Rubik's invention continues to conquer the minds of puzzle lovers. To correctly assemble a cube requires knowledge of the assembly order and patience. The cube is assembled in stages. First you need to assemble the first layer.
Instructions
Step 1
Rotating parts of the cube intuitively, we collect a cross of the same color on any selected side. The edge color is determined by the center piece, which always remains fixed.
Step 2
Pay attention to the correct assembly of the cross. The colors of the adjacent cube edge stickers must match the color of the center piece of the adjacent edge.
Step 3
If, during the assembly of the cross, the corner piece turns out to be the same color, let it remain in this place. The main thing is to get the correct cross.
Step 4
We turn the cube downward with the assembled cross. Let's start assembling the remaining elements of the first layer.
Step 5
We are looking for the required corner elements for the bottom layer on the top layer of the cube. Rotating the top face, adjust the required corner cube to the place where it should be located at the bottom. Pay attention to the colors of the adjacent corner stickers to determine the correct position.
Step 6
With the further assembly of the lower layer, we focus on the color of the corner cube, which should be located on the lower side of the cube, where the cross is located.
Step 7
If the color of the corner cube is looking forward, rotate the top face 90 degrees counterclockwise, then raise the left face up 90 degrees, then alternately replace the top and left faces. The corner cube from the top layer falls into place in the bottom layer.
Step 8
If the color of the corner cube looks to the left, rotate the top face clockwise 90 degrees, the front face also rotate clockwise 90 degrees, then alternately return the top and front faces to their place. The desired cube from the top layer falls into place at the bottom.
Step 9
If the color of the corner cube is looking up, the cube will need to be held so that the side with the cross looks back, and the color of the corner is on the front face in the upper right corner.
Step 10
Next, we perform the following rotations: lift the right edge up 90 degrees, move the upper edge counterclockwise by 90 degrees, then alternately return the right and upper edges to their place. We repeat the same rotation 2 more times. After that, the corner cube falls into place.
Step 11
After the corner cubes are in place, the first layer will be assembled.
