In Assassin's Creed, the hidden blade is the most commonly used weapon. It is this blade that allows Altair to quickly deal with enemies and quietly hide from the place of massacre. You can attack with this weapon from any direction. You can make such a blade in reality.
It is necessary
- • ball guides (3 carriages);
- • a kitchen knife with a blade that fits the last carriage of the guides;
- • saw-grinder;
- • scissors for metal;
- • glue;
- • screws;
- • a plastic bottle of such width that a hand can freely enter it;
- • scotch tape;
- • scissors;
- • office paper;
- • Printer.
Instructions
Step 1
Using metal scissors, cut off the latch at the end of the ball guides. You can take ball guides, which consist of only two parts, but it is much more convenient to use ball guides with three carriages.
Step 2
Using a grinder, cut a blade from a kitchen knife. You need to cut off with a margin, since part of the blade will go to the mount.
Step 3
Insert the blade into the last, smallest of the rail carriages. Fix the blade securely with glue. Then secure the blade with screws for reliability. In no case should he fly out and injure you or those around you.
Step 4
Cut a cylinder out of the bottle that will be the mechanism for attaching the weapon to your hand. In order to give the mechanism an aesthetic appearance and some solidity, print on a printer on a sheet of office paper the symbol you like - an emblem.
Step 5
Attach the ball guides with a blade to the resulting cylinder using tape. Stick the logo sheet onto the bottle. Practice "throwing" the blade with a wave of your hand and then hiding it back.
For a hidden blade, like in Assasin's Creed, you can use any type of strap that fits snugly around your wrist. These can be nylon weight lifting straps, medical wrist support straps, watch straps.
Step 6
For another way to create a hidden blade, you will need two folding knives. Unscrew all the screws from their case and set them aside, you will need them later. Remove the surface of the housing to expose the inside of the folding knife. Remove the trigger, spring, mechanism, blade rivet and blade from the body. Using pliers, pull the flaps, small springs out of the narrow holes inside the body.
Step 7
Detach the end of the body of one of the knives, holding it horizontally. With a marker, draw a line that vertically divides the body in half. Saw off the end along the line marked with a marker with a hacksaw. Place the file in the blade housing, cut off any metal debris. Weld both folding knife bodies together to create one long hidden blade body. Position both bodies of the uncut bodies lengthwise so that the blade is inserted into the end of the cut body and reaches the end of the uncut body.
Step 8
Reshape the surface of the second folding knife body to match the other folding knife body. Cut off the end of the surface of the first body where you cut the corresponding body. Holds the surface close to the body to mark the cut line with a marker before cutting. Cut out a metal stopper at the end of the blade cavity with a sander.
Step 9
You can start creating your blade. Clamp the end of the clamshell blade against the end of the other piece of the aluminum flat bar. The blade and aluminum flat bar must be the same size. Select a drill that is the same size as the rivet hole in the folding knife blade. Make a matching hole in the aluminum bar.
Step 10
Fix the working edge with the blade and the block, shape the block into a blade.
Modify one of the knife mechanisms by cutting off the protrusion so that the entire corresponding edge is smooth. Install the uncut gear in the modified case, then place the cut gear at the other end of the case and mark the location on the end of the cut gear. Cut off the end of the section of the trimmed mechanism that overlaps the uncut mechanism so that the pieces fit together and lie flush in the case.
Step 11
Replace the inner parts of the housing with pliers, pushing the shutters and small springs back in. Then insert the real hidden blade into the body and put the mechanism back in place. Return the long spring and attach its hook to the base of the body end. Install the switch and pull the end of the spring, holding only the hook, to the other end of the housing.
Step 12
The Hidden Blade in Assasin's Creed is the must-have and primary weapon of assassins used for stealth assassinations. It is a retractable blade that matches the bracelet. The blade extends imperceptibly, making it a particularly valuable weapon. The hidden blade has been modernized over time and its options are a miniature pistol, a poisoned blade with which you can poison the enemy, a blade with two blades, with which you can hit two targets at once. The Poison Thrower, invented in the game by Leonardo da Vinci, is also a variant of the hidden blade. It is a ranged poisonous blade that can be used to poison a target far away. The Grappling Hook is a special blade upgrade that allows you to navigate cities and jump from roof to roof.
