To draw a funny Teddy bear, you need to create a contour of parts of his body using simple geometric shapes, and then give it a worn look with patches, seams and fur sticking out in different directions.
Instructions
Step 1
Start the drawing by constructing auxiliary details corresponding to the head and body of the teddy bear. First draw a circle, which will later become the belly. Draw another circle above it, its diameter should be slightly less than the bottom part. Please note that there should be a small distance between these auxiliary elements, the bear's shoulder girdle will be located there.
Step 2
Draw the face of the Teddy bear. Sharpen the lower part of the face, flatten the top of the head. Draw the ears as far apart as possible; they are small, barely protruding semicircles with a highlighted inner part. Draw a small oval at the bottom of the muzzle. Mark the center of this oval, draw two rays from this point, an obtuse angle should form between them (about 120 degrees). Outline the base of this equilateral triangle, round the corners to form the nose. Above the area outlining the muzzle, draw two bold dots at a short distance from each other. If the Teddy bear's eyes are closed, draw two semicircles with the convex part facing up.
Step 3
Draw connecting lines from the head to the bear's belly. The body should have a teardrop shape; the bear does not have a pronounced neck. Select the belly with a line in the part where the chest is located on the people, just continue the outline of the circle that was the auxiliary element.
Step 4
Draw the limbs of the Teddy bear. The length of the legs is slightly less than the diameter of the lower circle, the handles are even shorter. A characteristic feature of the Teddy bear's legs is that they are much thicker at the bottom than at the top. The handles are the same along the entire length.
Step 5
Draw the stitches on the bear's body. On the head, they are located vertically in the center and obliquely on the cheeks. On the abdomen, select the central seam, and also have arms and legs along the longitudinal seam. Draw a few perpendicular lines to match the seams on each of the lines. Draw square patches on the bear's body, one each on the head and torso. Draw the seams that secure these pieces to the surface of the body.
Step 6
Draw an uneven zigzag line along the contours of all parts of the bear's body. Complete the drawing with short villi pointing in different directions. They are located everywhere except for the selected area on the face.
Step 7
Erase construction lines.
