The need to sew on a fur collar arises not only for the one who sews a winter coat or jacket himself. Fur tends to age, it sometimes needs to be cleaned or restored. In addition, you may want to make something useful out of an old fur coat. Most often it is precisely the collar or hem for the hat. It is important to sew them on so that they sit firmly and elegantly.
It is necessary
- - collar;
- - collar;
- - calico or chintz;
- - non-adhesive interlining;
- - adhesive interlining;
- - side board;
- - synthetic winterizer;
- - tailor's pins;
- - sewing machine;
- - needles;
- - threads.
Instructions
Step 1
The collar can be made of fur or the same fabric as the coat. It depends on how you will sew the collar. In any case, the collar itself needs to be strengthened. To do this, take a thin cotton fabric and circle the contours, adding 1 cm allowances on all sides. The fabric will be inside the product, so it doesn't matter which side to cut it on. Cut out the part.
Step 2
Lay the collar with the fur down and cover with a piece of fabric. Make sure that the same allowances remain on all sides. Stitch the fabric over the fur piece. This should be done with stitches of medium length, about 1.5 cm. The mezdra is not pierced through and through. It only needs to be lightly grabbed with a stitch. Fold the edges of the fabric so that the collar protrudes from all sides by about 1 cm. That is, it turns out that the cotton part needs to be folded around the entire perimeter by 2 cm. In the same way, cut out a chintz or plain lining for the fur collar, fasten it and turn it up. To make it easier to sew on the collar, you can sew a braid along the edge of the collar.
Step 3
Cut a gasket out of the non-adhesive non-woven fabric in the shape of the collar. It should be exactly the same size as the calico pad. Instead of non-woven fabric, you can use a flange and other fabric of the same type. This detail is needed to keep the collar in shape better. Sew it to the gingham layer.
Step 4
Fold the collar and collar with the fur towards each other. Pin them with tailor's pins or baste them in several places. Sew the parts together. The collar is slightly larger than the collar, so it is planted. Leave a cut open that will stitch to the neckline. Turn out what you get.
Step 5
Your further actions depend on the situation and on the thickness of the product. Align the open cut of the collar with the neckline. The fur of the collar must be in contact with the fur of the product. Pin the future seam in several places. If the machine takes this thickness, sew the details. You can also sew them with a furrier stitch. Fold the uncovered collar and sew it to the fur coat with a strong blind seam.
Step 6
If you are sewing the collar to the coat, then the collar will not be made of fur, but from the same fabric as the product itself. In this case, you can strengthen it with adhesive interlining. For a second pad, take a padding polyester or batting. All gaskets must be cut strictly along the contour. Sintepon or wadding sweep to non-woven.
Step 7
If the collar has not yet been sewn to the coat, sew it in the same way as for any other garment, matching the front sides of the parts. Lay on the collar and fold the edges over the contour. Sew the fur with a blind stitch around the entire collar.
