A real fashionista should have a lot of jewelry. You can store them not only in an ordinary box, but also on special stands, which may well become an excellent interior decoration.
Picture-holder for earrings
A very convenient stand for earrings with temples, which can also become an original decoration of a girl's room. To make a picture you will need:
- frame;
- a piece of lace fabric;
- construction stapler.
Find the right frame. You can use a baguette for decorating pictures or a regular photo frame. If the frame does not match the color of the fabric, paint it with acrylics to match the material. This is best done with spray paints or painted with a dishwashing sponge.
From the lace fabric, cut a rectangle to fit the frame. Attach it to the wrong side of the frame and attach one side to the baguette with a construction stapler. Stretch the fabric and attach it to the other three sides in the same way. The lace should be very tight. Now you can hang the painting on the wall and attach earrings to it.
There are several options for making such an earring holder. Instead of lace, you can use plastic netting from a hardware store. You can also nail a few studs on two opposite sides of the frame and pull a wire between them.
Book-holder for earrings-stud
Earrings-studs will not be lost if you store them in the original stand in the form of a book. To make it you will need:
- cardboard;
- colored paper;
- thin satin ribbon;
- thin foam rubber;
- scissors;
- glue "Moment";
- PVA glue;
- threads;
- thick needle.
Cut a rectangle out of cardboard 11x7 cm. Divide it into 3 parts along the long side, measure 5 cm, 1 cm and again 5 cm. Draw the strips vertically and fold the blank in the form of a book cover.
Cut out 2 rectangular pieces from colored paper. One equal blank made of cardboard, the second - 1 cm more on all sides. Cut 2 pieces of satin ribbon, 8-10 cm each. Glue them in the middle of the cardboard blank with Moment glue.
Decorate the stand. To the outside of the booklet, glue a larger piece of colored paper with PVA glue. Fold the seam allowances to the wrong side and glue them as well. Then attach a smaller piece to the inside.
Make the pages of the book out of thin foam rubber. Cut out 2 rectangles 10 x 7 cm. Fold them in half. Sew the details in the middle with a back seam. Glue them with Moment glue to the cardboard cover. Stick the studs into the foam rubber and fasten with clasps on the other side of the page.
