If you have scraps of beautiful fabric left over, don't throw them away. It is not difficult to sew such an unusual belt from them. You can combine several fabrics of similar colors. Or, on the contrary, you can combine contrasting colors. It all depends on your imagination.
It is necessary
- -pieces of fabric
- non-woven
- -2 buckle rings
Instructions
Step 1
Cut out rectangles from fabric about 5 by 12 cm and 7 by 12 cm, 12 pieces each. You can choose the size and quantity yourself, depending on the size of the fabric scraps and the desired size of the finished belt.
Step 2
We sew rectangles together to make two strips of the same length. Rectangles 5 cm wide in one strip, and 7 cm wide in the other. Ironing out. We glue the interlining to the seamy side of the narrow strip.
Step 3
We put a wide strip face down, and on top - a narrow strip face up. We cut it off with pins. Cut out the ends of the stripes at an angle of 45 degrees so that the tip of the lower one protrudes 1 cm from under the upper one. Cut off the sharp corner of the bottom strip.
Step 4
Wrap all raw edges inward twice, baste and stitch. The corners are cut diagonally. We pass the buckle rings and attach the straight end of the belt. Done!