Of course, it is impossible to create a violin similar to the Stradivarius instrument, but you can try to make it at all. The sound of the violin continues to amaze people, make them think and dream, and therefore the work is masterfully in full swing in all countries of the world to present the next musical instruments.
It is necessary
Lower and upper body, 6 mm spruce stick, bass bow, set of tools, strings, scissors, drill, glue, chisel, clamps, sheets of paper
Instructions
Step 1
First, make templates for making the upper and lower case. Saw out both parts and insert a spruce stick with them, which will become a voice bow.
Step 2
Place the bass bow on the upper left half of the instrument.
Step 3
Remove the jumpers when making selections in the preset violin body. Bring the walls of the case to a thickness of 5 mm.
Step 4
Take the bar and saw off the wedge from it. Glue on the back side.
Step 5
Saw the upper surface of the violin with a hacksaw (use a narrow hacksaw), having previously marked along the ruler.
Step 6
Strip the neck and make it rounded, and use a chisel to remove wood particles.
Step 7
Make sound holes on the upper body of the violin. Shape the glued bass bow to the desired shape.
Step 8
Glue both parts of the violin together and press them down for a while. At this time, make a bar for the bar. Please note that one of the parts must be wedge-shaped.
Step 9
Position the bar on the body and neck using glue. Lead the sanding.
Step 10
Make a comb base for the strings, and using a tapered screwdriver, punch holes for the string clamps, which should protrude 15 mm to the surface.
Step 11
Carry out the operation on the arrangement of the strings and fix the stand with the sound holes. I managed to make a violin myself without any outside help and a time line.
