Board games can be fun for the whole family. Both children and adults like them. But for many of these games, a cube is needed, and it is very often lost. If you are going to play, but the cube has gone somewhere, make it yourself.
It is necessary
- Cardboard
- Scissors
- Glue
- Gon
- Pencil
Instructions
Step 1
Unfold the cube. Draw a straight line. The direction can be arbitrary, but it is better if it is parallel to one of the sides and at a distance slightly larger than the edge of the cube. Place a dot on the line and set the size of the edge from it. For the game, you need a small cube, with an edge no more than 3 cm. From the two points obtained, draw perpendiculars and also set the size of the edge on them. Connect the ends of the perpendiculars. It turned out the central square, from which you will draw the rest of the faces.
Step 2
Extend the sides of the square in all directions, and on each straight line, set the length of the rib. Connect the resulting points in pairs to make line segments parallel to the sides of the original square. You have 5 squares, you need 1 more. Draw it on either side, continuing the corresponding sides of the existing square. The reamer is ready, but it's too early to cut it.
Step 3
Take care of the gluing allowances. Draw them on the side where 2 are drawn from the original square. Draw lines parallel to the sides of the resulting rectangle, at a distance of about 0.5 cm. Where the side square meets the original, bevel the allowance at about 45 °.
Step 4
Cut out the cube, taking into account the allowances. Cut the allowances where the squares meet on the long side of the reamer. Bevel the corners.
Step 5
Bend the cube along the edges. Fold over the gluing allowances. Draw points from 1 to 6 on the sides of the cube, and then glue the structure.
