Ribbons and braids of various colors and sizes are in perfect harmony in jewelry and create a unique composition. Products from ribbons are used to decorate gifts and bouquets, they are realized in amazingly beautiful brooches and hairpins.
It is necessary
- For a bow tie:
- - beads of different sizes;
- - wire;
- - sewing accessories;
- - rep ribbon (satin) 0.5 cm wide;
- For the Slippers souvenir:
- - thin cardboard (A4);
- - satin tape;
- - thread;
- - needle;
- - glue "Moment";
- For a rose:
- - wide satin ribbon (red, pink, white);
- - narrow satin ribbon (green);
- - rose leaves (artificial);
- - thin white wire;
- - green wire;
Instructions
Step 1
Beautiful and delicate butterfly hairpin. Mark up on the tape. Place dots at the intervals shown in the following order: 7cm, 4.5cm, 7.5cm, 5.5cm, 6.5cm, 3.5cm, 5.5cm, 5cm, 5cm, 5, 5 cm, 3, 5 cm, 6, 5 cm, 5, 5 cm, 7, 5 cm, 4, 5 cm, 7 cm. Start at 7 cm, making a mark, and end with 7 cm. Assemble the tape from using the accordion needle thread, inserting the needle at the marked points and pulling the binding thread.
Step 2
The tape should be placed on opposite sides of the needle. Subsequently, when you collect the entire ribbon, pull the thread and secure with a knot. Gently unfold the workpiece in a circle so that it is located along a spiral line. Shape the wings of the butterfly, securing them with thread to keep them from falling apart.
Step 3
Make the torso with the antennae by preparing 2 small beads (for the antennae) and 3 large (for the body). Pass the wire through the bead and twist the two ends of the wire, about 1 cm. Then add a second bead and twist the wire 1 cm again.
Step 4
Place one large bead into the remaining 2 ends of the wire, after which, having divided the ends of the wire, place 2 large beads on one of them. Attach the body to the bow tie and secure from the bottom with wire. Stick on the crocodile clasp.
Step 5
Souvenir "Slippers". Make templates for the sole and upper part of the slippers on A4 sheet. Prepare strips by cutting the ribbon according to the size of the pattern.
Step 6
The strip should wrap around the part on both sides. The weaving pattern is a simple checkerboard braid. Start weaving with 3 strips, gradually alternating between vertical and horizontal ribbons.
Step 7
When finished braiding the upper part of the slipper, fly off the sole, securing the edges with glue. Assemble the slippers by stitching the pieces together. Decorate the top with tape gathered onto a thread.
Step 8
Next, sew on the tie ribbons and the rose flower. Such a souvenir can be used as a gift or adapted instead of a needle bed by inserting foam rubber or synthetic winterizer inside, and then decorating it with a cloth or ribbon.
Step 9
A voluminous rose made of satin ribbon. Measure a piece of a wide pink ribbon 8 cm long and cut off its edges at an angle, cutting off to 1 cm from each opposite corner. Then fold one edge of the tape down perpendicularly. Then lower the horizontally located segment of the ribbon downward, bending it and attaching it parallel to the sheer part of the element.
Step 10
Place the ends of the tape crosswise. Twisting the white wire into a bundle, connect it with the overlapping edges of the tape and fix it with another piece of wire. Form a total of 9 identical petals.
Step 11
For leaflets, cut the green ribbon into strips of equal length. Collect the rosebud by folding the petals together in a circle. Fasten the green leaf segments under the bud. Decorate the bottom of the bud with green tape, forming a "cup", continuing to wrap to the end of the wire (stem).
Step 12
By analogy, make a more lush and elegant rose, using more petals. Prepare a green wire more authentic and fix a rosebud on top of it with a green ribbon, after some distance - an artificial leaf, and then attach a large lush rose.
