Putting an egg in a bottle is one of the easiest technologies in the category of practical jokes and simple tricks. There are two ways to put an egg in a bottle.
It is necessary
- - Vinegar.
- - Egg
- - Matches
- - Paper
- - Candle
- - Boiling water
Instructions
Step 1
For the first method, take a regular raw chicken egg and place it in concentrated vinegar for about 12 hours. After being in acetic acid, the shell of the egg will become soft and pliable, similar to plasticine. Gently roll the sausage out of the egg. Put the sausage in the bottle. Then, pour into a bottle of clean cold water and the egg will return to its original shape. The water can then be drained off. The egg will dry out and become slightly stronger.
Step 2
For the second method, you will need a boiled egg. It is advisable to choose smaller eggs, and bottles with a wider neck. Peel the egg. Light a piece of paper and throw it into the bottle. Place an egg on the neck of the bottle. The burning paper will burn out the oxygen, creating a vacuum that will pull the egg into the bottle. You can also heat the bottom of the bottle over low heat. The main thing here is not to overdo it, otherwise the bottle may burst. An ordinary candle is suitable for heating the bottom. Heat the bottom, and put the egg on the neck as well - after a while the boiled egg will fall into the bottle.
Step 3
Now about the way to get the egg out of the bottle.
Turn the bottle upside down. The bottle must be weighed so that there is room for the egg to drop. Lock the bottle in this position. Never hold the bottle with your hands. Start pouring boiling water onto the bottle prepared in this way. The egg will be safely squeezed out by the increased internal pressure.
