Wait for this endless winter to end. Put on rubber boots and run through the muddy snow to a puddle, and if you're lucky, to a stream, launch boats. This is not just entertainment, but a long-awaited joy, familiar to our parents, as well as the technique of building these very paper boats. Let us recall the shipbuilding scheme for those who are preparing to become the head of the paper fleet for the first time this spring.
It is necessary
paper
Instructions
Step 1
Take a piece of paper. Better not too thick, ordinary notebook paper or printer paper will do. Fold the sheet in half.
Step 2
Place the sheet with the fold up. Bend the right and left corners towards the center axis.
Step 3
Lift the remaining lower halves up towards the formed corner.
Step 4
With your thumbs, take the paper from the inside, at the level of the central axis, pull it to the sides. At the same time, the right and left corners will go down and connect.
Step 5
Raise the lower corners of the resulting rhombus up, bending at the level of the middle.
Step 6
Invert the triangle again in the center, bringing its right and left corners closer together. The result is a rhombus. Take it by the top with both hands and pull it to the sides.
